STORE PRODUCT ALARM
Store product alarm is generally used in store-type areas where textile or electronic goods are sold. The system is used to ensure that the alarm goes off when the person leaving the store steals.
Store product alarms are generally used for theft in locker rooms. In addition, in stores selling electronic goods, they help protect people’s products such as laptops and mobile phones, which can easily be stolen by putting them in their bags.

What is Store Product Alert?
The main equipment of store product protection systems are the antennas to be positioned at the entrance door. These antennas should be positioned opposite each other as a minimum of 1 pair.
Antennas can be increased in number depending on the width of the input area. The ideal size is a maximum of 140 cm between two antennas. This distance can be up to 2 meters for acousto-magnetic antennas.
There are differences in frequency signals between RF antennas and acousto magnetic antennas.
After antennas are placed at the entrance, alarms, which we call a tag, are attached to each product, for example in a store that sells clothes.
These jewels are removed by the cashier when paying for the product and are kept for reuse.
A similar structure applies to stores selling electronic goods.
This time, a product protection label is pasted on the product boxes instead of a hard plastic product alarm label.
The paper type product protection label is for one-time use. When the product is paid, the cashier shows the paper tag to the device we call the deactivator of the system, and the paper tag loses its function and will no longer be detected by the antennas when passing through the door.

Product Alarm Tag

Product Alarm Label
The product alarm label used in the product protection system is generally used in 4*4 cm or 5*5 cm dimensions. In addition, thinner and longer types are often preferred.
It is suitable for use on products with hard surfaces. For example, it can be pasted on a mobile phone packaging box or on a perfume box.

Product Alarm Remover
Plastic type clothes alarm removers work with magnetic magnet logic. Versions for rf store product alarms are available as normal alarm remover and super remover.
Motorized and non-motorized clothes removers are available for acousto magnetic product alarms.
Since the removed alarms must be reusable, the remover does not cause any damage to the clothes alarm during the disassembly process.

Product Alarm Paper Label Deactivator
It destroys paper label type product alarms after payment is made at the cash register.
Since the paper label is adhered to the product, it should not be removed as it will remove the underlying material when removing it.
Since the antennas will beep during exit without disassembly, the label is killed with a deactivator at the safe.
The label shown to the deactivator once will not work again.



Store Product Alarms
Maximum Security Minimum Error
perpa shop product alarm perpa
perpa shop product safety
perpa clothing protection system
perpa product protection system
perpa product security systems
perpa paper tag alarm
perpa eas solutions
perpa product alarm tag
şişli shop product alarm perpa
şişli shop product safety
şişli clothing protection system
şişli product protection system
şişli product security systems
şişli paper tag alarm
şişli eas solutions
şişli product alarm tag
istanbul shop product alarm perpa
istanbul shop product safety
istanbul clothing protection system
istanbul product protection system
istanbul product security systems
istanbul paper tag alarm
istanbul eas solutions
istanbul product alarm tag