MOBILE PARKING PAYMENT SYSTEMS

• Android Operating system must be 6.0 or above.
• Ram support should be 8 GB Nand Flash and 1GB.
• The touch screen must be 5.5” IPS Projected Capacitive.
• Screen resolution must be 1280×720 HD.
• Integrated Thermal Receipt Printer should be able to print up to 58 mm.
• Wireless communication feature must be IEEE 802.11 a/b/g/n Wi-Fi.
• Bluetooth 4.0, BLE, iBeacon must be used in wireless connection.
• It must have a built-in 3G Module and SIM Card Slot.
• It should have an integrated 5.0 MP Auto Focus Camera.
• Must have 7.4V/5200 mAh High Lithium battery capacity.
• Optional Desktop Barcode Reading Slot can be added.
• It should have a print speed of 60mm/s.
• It must have 50km print head clearance.
• It must have 1 × SIM Card slot.
• It must have a Type-C USB input for PC Communication port.
• Device size should be 21.7 x 8.9 x 5.8cm.
• The device must have GPS support.
• Communication methods must be GSM / WCDMA 2G (850/900/1800/1900).
• It must have a high speed thermal printer.
• It should support paper roll diameter up to 40mm.
• 1D Barcode Recognition Scanning from the rear camera must have 1D and 2D barcode reading support.
• It should have volume up/down buttons.
• Environment, ambient working temperature should be 0℃~40℃.
• Storage temperature should be -10℃~0℃.

Mobile Handheld Terminal Embedded Android Parking Charging Software Features

System software must run on Android Operating system.
It should be possible to enter the menus on the software main interface by touch.
There should be one input and one output button on the software main interface.
There should be a ticket search/reprint menu for a lost ticket on the software main interface.
The software should support multiple users, each user should be able to log in with their own username and password.
The software should be able to report the revenue of each user separately.
The user should not be able to exit the software menu easily, and should be able to exit by pressing more than one key at the same time to close the software.
The software should have a settings menu with areas such as reporting, tariffing, receipt settings and user settings.
The software should be able to allow unlimited tariff entry.
When the software entry button is pressed, the vehicle should be able to be entered either from the touch keyboard or by speaking through a headset and microphone.
The user should be able to easily change the general information to be written on the receipt, such as company name, company phone number and address.
When checking out, the parking fee should be calculated by scanning the receipt with the built-in camera on the back of the device.

The software should have optional menus such as large vehicle, small vehicle, car wash, valet, and these extra fees should be added to the parking fee.
The software should be able to instantly display information such as the vehicle inside, the vehicle leaving, the vehicle for which payment was received, etc., in the reports section.
The software should have the ability to send e-mail, reports should be automatically sent to the relevant e-mail address when a new user logs in or at the end of the day.
The software should enable receiving an end-of-day report, and the total report containing all vehicle license plates, entry times, exit times and fare information since the last report received should be available on the device as a paper printout.
The software must be able to read square barcodes and the reading speed must be <2Sec.
Automobile, Minibus, Bus etc. in the software. Price Tariffs Should Be Defined.
It should not impose any restrictions on the time the vehicle remains inside, and should be able to calculate even a vehicle that has been inside for a year.
The software must have a subscription system and be able to provide services for monthly or annual subscribers.
The receipts produced by the system should not have any financial value and the statement “No financial value” should appear on the receipt.
Free tariffs must be definable in the software.
The software must be able to print an information slip upon exit.
The number of receipts printed at the entrance or exit should be specified in the settings menu.
Operator, license plate and tariff based reporting should be able to be created.
The logo to be printed on the receipt can be changed in the settings menu.
Automobile, Minibus, Bus etc. Price Tariffs Are Defined..
Calculates Fees for Vehicles Remaining in the Parking Lot for 1 Year.
Free Tariffs Are Defined.
Creates Reports Based on Operator, Plate and Tariff.
Prints Information Receipt at Exit.
End of Day Reports are Automatically Emailed or Printed by Connecting to the Internet via Wifi.

Mobile Handheld Terminal Web Server Panel Technical Specification

There should be a dashboard on the server panel.
Parking reports such as customers, subscribers, blacklist should be able to be given in the server panel.
End of day reporting should be possible from the server panel.
Subscriber definitions such as Subscribers, groups and types should be possible in the server panel.
There should be a blacklist feature in the server panel.
If there is more than one car park on the server, there must be a car parks option.
There should be a registered devices option in the server panel.
There should be a tariffs option in the server panel.
There must be a survey feature in the server panel.
Sms formats must be specified in the server panel.

Additionally, our company can be preferred for license plate recognition systems for parking lots.